User Manual Q&AAnswer
Nov 13, 2025 - 09:37 AM
To properly clean and maintain your DOMO DO1102CS lint remover, follow these steps as outlined in the instruction manual:
1. **Regular Cleaning:**
- Turn off the device and remove the batteries before cleaning.
- Use the cleaning brush provided to remove any lint or debris from the blades and lint container.
- Empty the lint container after each use to prevent clogging.
- Wipe the device with a dry cloth.
2. **Deep Cleaning:**
- When the lint container is approximately 80% full, empty it and clean the blades with the cleaning brush.
- Remove the lint container by turning it anti-clockwise and clean out any lint using the brush.
- Remove the blade protector by turning it anti-clockwise and clean it as well.
- Clean the blades with the brush, being careful as they are sharp. Do not touch them with your fingers.
- Ensure all parts are properly tightened and put back in place.
- Wipe the outside of the device with a dry or slightly damp cloth.
- Store the device on a clean, dry surface.
3. **Maintenance Tips:**
- Do not use cleaning products, alcohol, or other substances to clean the device.
- Do not submerge the device in water.
- Avoid pressing the blade protector too hard to prevent denting.
- Clean the device regularly to prevent lint accumulation between the blades and protector, which can affect performance and longevity.
- Do not use the device without the lint container to avoid injury or damage.
By following these cleaning and maintenance instructions, you can ensure that your DOMO DO1102CS lint remover remains in optimal condition for efficient lint removal from your fabrics.
Add New Comment