User Manual Q&AAnswer
Nov 12, 2025 - 01:26 PM
To pair the Homematic IP Wired Glass Display with the Homematic IP Central Control Unit CCU3 or the Homematic IP cloud, follow these steps:
1. **Connecting to the Homematic IP Central Control Unit CCU3:**
- Set up your Central Control Unit CCU3 and connect the Homematic IP Wired Access Point.
- Start the WebUI user interface on your computer.
- Click the "Add devices" button and select "Pairing HmIP device."
- Activate the pairing mode on the device by pressing the system button briefly.
- Wait for the pairing process to complete. The LED will light up green if successful.
2. **Connecting to the Homematic IP cloud via Wired access point:**
- Open the Homematic IP app on your smartphone.
- Connect the Homematic IP Wired Access Point to the Homematic IP cloud through the app.
- Activate the pairing mode on the device by pressing the system button briefly.
- Wait for the pairing process to complete. The LED will light up green if successful.
3. **Additional Steps:**
- Once paired, you can name the device, allocate it to a room, and configure its settings using the respective interface (WebUI or Homematic IP app).
- If you encounter any issues during pairing, refer to the error codes and flashing sequences section in the manual for troubleshooting steps.
By following these instructions, you can successfully pair your Homematic IP Wired Glass Display with the desired control unit for seamless operation within your smart home system.
Add New Comment