User Manual Q&AAnswer
Nov 12, 2025 - 01:17 PM
To verify that the ESL VISION Emergency Driver EMG Box is functioning correctly after installation, follow these steps:
1. **Press the Test Button:** After completing the installation process, press the Test Button on the driver. This button is typically connected to a switch button or emergency switch button. Pressing this button will simulate an emergency situation and test whether the driver can provide power to the connected lighting fixtures.
2. **Observe Lighting Fixtures:** Upon pressing the Test Button, check if the connected LED panel or lighting fixture receives power and illuminates. This indicates that the emergency driver is successfully supplying power during an emergency scenario.
3. **Ensure Proper Functionality:** Confirm that the emergency driver is able to switch to emergency mode seamlessly and provide power to the lighting fixtures when the Test Button is activated. If the lighting fixtures do not receive power or fail to operate during the test, there may be an issue with the installation that requires further inspection by a qualified electrician or lighting technician.
4. **Regular Maintenance:** Remember to periodically test the emergency driver system as part of routine maintenance to ensure its continued functionality in case of an emergency. Additionally, follow the manufacturer's guidelines regarding battery charging and maintenance to keep the unit in optimal working condition.
By following these steps and conducting regular tests, you can ensure that the ESL VISION Emergency Driver EMG Box is operating correctly and ready to provide emergency power supply to your lighting fixtures when needed.
Add New Comment