User Manual Q&AAnswer
Nov 11, 2025 - 03:39 PM
**Installation Steps:**
1. **Choosing a Suitable Location:**
- Select a location free from interference and with a stable power supply.
2. **Hardware Installation:**
- Connect the Ethernet cable to the Ethernet port on the device.
- Connect the other end of the Ethernet cable to a switch or router.
- Connect the power supply to the device and turn it on.
3. **Mounting the Device:**
- Follow the instructions provided in the manual for wall mounting, vertical pole mounting, or horizontal pole mounting.
4. **Connecting Ethernet Cables:**
- Trim an Ethernet cable according to the distance between the access point and the power supply.
- Insert the unterminated end of the Ethernet cable through the designated parts and install an RJ45 connector.
- Insert the RJ45 connector into the LAN, PoE, or uplink port of the access point.
5. **Sealing and Weatherproofing:**
- Seal unused ports with weatherproof caps.
- Ensure proper sealing of the DC port and reset button with clean weatherproof caps.
**Setting Up the Wireless Network:**
1. **Wireless Connection:**
- Ensure your device has a wireless network adapter.
- Search for wireless networks in your device's settings.
- Select the SSID of the Ruijie RG-RAP6202(G) Access Point.
- Enter the network password when prompted.
**Additional Resources:**
- For technical support, visit the official Ruijie Reyee website or contact their technical support team via email.
- Refer to the complete installation guide and technical specifications provided in the manual for detailed instructions and troubleshooting tips.
Add New Comment