User Manual Q&AAnswer
Nov 11, 2025 - 12:42 PM
To switch between devices using the Verbatim Multi-Device Wireless Rechargeable Optical Mouse, follow these steps:
1. Ensure the mouse is turned on.
2. Press the connect button (indicated with surrounding arrows) on the mouse to switch between connection types:
a. For 2.4G connection using the nano receiver: Select the 2.4G connection using the connect button and connect the receiver to the computer. The mouse will operate as normal.
b. For Bluetooth connection (BT1 or BT2): Select between BT1 or BT2 Bluetooth connection using the connect button. Open the Bluetooth pairing mode on your computer and start searching for devices. Hold the arrows circle button down for several seconds until the corresponding BT LED flashes quickly on the mouse. You will see the Verbatim mouse or Verbatim BT Mouse listed on your computer for selection and pairing.
3. If the Bluetooth pairing is unsuccessful the first time, repeat the instructions above, ensuring that the computer is still searching for Bluetooth devices when the BT LED on the mouse is flashing rapidly and in pairing mode.
By following these steps, you can easily switch between devices using the Verbatim Multi-Device Wireless Rechargeable Optical Mouse.
Add New Comment