How do configure DoorBird A1121 access control remotely using DoorBird app web-based administration tool? (DoorBird A1121 Ip Access Control Instruction Manual)

Answer

manuals.plus

Nov 11, 2025 - 12:04 PM

To configure the DoorBird A1121 access control device remotely, follow these steps:

1. **Download the DoorBird App:** Install the free DoorBird app on your smartphone or tablet from the App Store (iOS) or Google Play Store (Android).

2. **Connect to the Device:** Ensure your DoorBird A1121 is connected to the network via LAN or WLAN cable and powered using PoE or a 15 VDC power supply.

3. **Open the App:** Launch the DoorBird app on your mobile device and log in with your DoorBird account credentials.

4. **Access Control Settings:** Navigate to the access control settings within the app to configure individual schedules, validities, and actions for each PIN code, RFID transponder, etc.

5. **Remote Configuration:** Use the app's interface to define specific access parameters and settings for the DoorBird A1121 device.

6. **Web-Based Administration Tool:** Alternatively, you can also configure the device remotely using the web-based administration tool by visiting https://webadmin.doorbird.com on a web browser.

7. **Integration with Third-Party Systems:** If desired, you can integrate the DoorBird A1121 with third-party home and building automation systems using HTTP(S) calls.

8. **Tamper Sensor Setup:** Configure the tamper sensor to detect any unauthorized removal of the device and set up real-time push notifications for security alerts.

By following these steps, you can easily configure and manage the DoorBird A1121 access control device remotely using the DoorBird app or web-based administration tool as per the manufacturer's instructions.