User Manual Q&AAnswer
Nov 10, 2025 - 12:29 PM
To use the ACT AC7054 USB-C Card Reader for SD/Micro SD to read and write memory cards simultaneously, follow these steps:
1. **Connect the Card Reader:** Plug the USB-C male connector of the card reader into a USB-C port on your computer or mobile device. The card reader is plug-and-play, so it should be automatically recognized by your device.
2. **Insert Memory Cards:** The AC7054 has one SD card slot and one micro SD card slot. Insert the memory cards you want to read or write into the corresponding slots on the card reader. You can use both slots simultaneously to work with two memory cards at the same time.
3. **Access Memory Cards:** Once the memory cards are inserted, you can access them on your computer or mobile device. The card reader supports memory cards up to 2TB in size.
4. **Read and Write Data:** You can now read data from or write data to the memory cards inserted in the card reader. The data transfer rate is up to 5 Gbps, thanks to USB 3.2 Gen1 compliance.
5. **OTG Support:** If you want to use the card reader with a smartphone or tablet that supports OTG (On-The-Go), connect the card reader to your mobile device using an appropriate OTG adapter or cable. This allows you to access external memory cards on your mobile device.
6. **Aluminum Housing:** The compact aluminum housing of the AC7054 provides durability and protection for the card reader, making it ideal for travel or everyday use.
By following these steps, you can effectively use the ACT AC7054 USB-C Card Reader for SD/Micro SD to read and write memory cards simultaneously.
Add New Comment