How do I set up and program NFC-RTZM FirstCommand Remote Telephone Zone Module Notifier First-Command Center? (NOTIFIER NFC-RTZM Telephone Zone Module Owner's Manual)

Answer

manuals.plus

Nov 10, 2025 - 11:10 AM

To set up and program the NFC-RTZM Remote Telephone Zone Module, follow these steps based on the information provided in the owner's manual:

1. **Installation:** Mount the NFC-RTZM inside the NFC-50/100(E) cabinet according to the product installation document. Ensure it is securely installed and connected to the J9 connector on the main control board.

2. **Programming:** Use web-based programming for fast commissioning of the NFC-RTZM. This will allow you to configure the module for remote access and set up specific features such as password authentication and Caller-ID based authentication.

3. **Remote Access:** Authorized personnel can call into the NFC-RTZM from any landline or cellular phone to initiate events. By using touch-tone based activation through DTMF, users can trigger live or prerecorded messages over selected speaker zones on the NFC-50/100(E).

4. **Authentication:** The NFC-RTZM provides password-based authentication for limited access and security. Users issued a four-digit password can gain access to the system. Additionally, up to five preconfigured phone numbers can be set for seamless Caller-ID based authentication.

5. **Zone Activation:** The NFC-RTZM allows for All Call or Selective Zone activation, with up to 24 selectable zones available. You can also create 16 programmable speaker zone groups for initiating multiple speaker zones simultaneously.

6. **Language Configuration:** The module can be configured for English, Spanish, French, and Portuguese capability during programming, catering to different language preferences.

7. **Applications:** The NFC-RTZM is suitable for various applications including schools, dormitories, factories, theaters, military facilities, restaurants, auditoriums, places of worship, and office buildings.

By following these steps and referring to the owner's manual for detailed instructions, you can successfully set up and program the NFC-RTZM Remote Telephone Zone Module for your Notifier First-Command Center.