User Manual Q&AAnswer
Nov 10, 2025 - 08:18 AM
After replacing the air filter unit in your Panasonic projector, you may need to reset the filter usage time. Here is a step-by-step guide on how to reset the filter usage time as per the user manual:
1. Turn off the power of the projector and disconnect the power plug from the power outlet.
2. Remove the air filter cover by following the instructions provided in the manual for your specific cabinet type (A or B).
3. Remove the air filter unit from the tabs of the projector.
4. Attach the unused air filter unit (Replacement Filter Unit) to the projector.
5. Close the air filter cover securely and tighten the fixing xxxx if applicable.
6. Connect the power plug, set the switch to the appropriate position, and turn on the power.
7. Press the button to display the main menu, then select [PROJECTOR SETUP].
8. Navigate to [FILTER COUNTER] and press the button.
9. Select [FILTER COUNTER RESET] and press the button.
10. Confirm the reset by selecting [OK] and pressing the button.
Following these steps will reset the filter usage time on your Panasonic projector after replacing the air filter unit. Remember to ensure that the air filter unit is properly attached before using the projector to prevent malfunctions.
Add New Comment