User Manual Q&AAnswer
Nov 06, 2025 - 03:28 PM
To set up the InHand Networks CR202 Portable 4G Router for internet access using a SIM card, follow these steps as outlined in the installation manual:
1. **SIM Card Installation:**
- The CR202 supports a single Nano SIM card. Insert the SIM card into the router when the device is powered off.
2. **Antenna Installation:**
- Rotate the metal interface of the antenna clockwise until the movable part cannot be rotated. Do not twist the antenna by holding the black glue stick.
3. **SIM Card Dialup:**
- Power on the device after inserting the SIM card. Connect the 4G antenna to the router and connect a PC to the router.
- Open a browser and access the router's WEB management page.
- Click on "Network >> Cellular" and set up the profile. The device enables cellular by default and should connect to the internet within a few minutes. If connection fails, disable and restart the dialup. If using a private network SIM card, configure the APN parameter as well.
- Check the dialup status in the "Status" section. If it shows as Connected with an IP address and other dialup parameters, the router has successfully connected to the internet via the SIM card.
By following these steps, you should be able to set up your InHand Networks CR202 Portable 4G Router for internet access using a SIM card successfully.
Add New Comment