User Manual Q&AAnswer
Nov 05, 2025 - 02:40 PM
To properly set up and use the Snap Attack Football Machine, follow these guidelines as outlined in the instruction manual:
1. **Setting Up as a Centering Machine:**
- If the machine is attached to the stand, tip it over onto its feet and remove the legs and knobs.
- Open the rear leg support latch, insert the rear leg support, and tighten with the wing nut.
- Point the machine in the desired direction and adjust the angle using the passing handle.
- Turn on the machine, set the ball in the cradle, and feed it into the throwing wheels.
- Adjust the elevation and wheel speed for the desired spin.
2. **Setting Up for Passing, Punts, and Kickoffs:**
- Attach the throwing head to the undercarriage using the stored knobs.
- Insert the legs into the sockets and tilt the machine onto all three tripod legs.
- Remove the lock pin to allow horizontal pivoting.
- Adjust the wheel tilt angle for different types of throws.
- Plug the machine into a power source and adjust the wheel speed for distance and speed.
3. **Safety Precautions:**
- Always turn off the power and unplug the machine before any maintenance or adjustments.
- Keep hands away from moving throwing wheels when the machine is connected to power.
- Ensure the machine is securely set up and clear of obstructions before operation.
4. **Ball Selection and Maintenance:**
- Use official size and type consistent balls for optimal performance.
- Avoid using wet or damp balls and maintain air pressure between 10-12 lbs.
- Clean the throwing wheels periodically to prevent build-up of grass and dirt.
5. **Maintenance and Lubrication:**
- Apply fresh grease to pass and kick elevation control handle threads once per season.
- Clean and lubricate the horizontal swivel lock as needed.
- Throwing wheel motors are sealed and require no lubrication, but check bolts for tightness regularly.
By following these instructions and safety guidelines, users can effectively set up, operate, and maintain the Snap Attack Football Machine for optimal performance and longevity.
Add New Comment