User Manual Q&AAnswer
Nov 05, 2025 - 02:31 PM
To control the LG OLED Smart TV using an external control device, you can use the following common commands and protocols as outlined in the owner's manual:
**Transmission Protocol:**
- Command Format: [Command1][Command2][ ][Set ID][ ][Data][Cr]
- Command 1: First command to control the TV (j, k, m, or x)
- Command 2: Second command to control the TV
- Set ID: Adjust the monitor ID number in the range of 1 to 99. Set ID value of 0 allows control of all connected sets.
- Data: Transmit command data in hexadecimal format. Use 'FF' data to read the status of the command.
- Carriage Return: ASCII code '0x0D'
**Common Commands:**
1. Power: Control TV power (ka)
2. Aspect Ratio: Adjust aspect ratio (k)
3. Screen Mute: Mute the screen (k)
4. Volume Mute: Mute the volume (k)
5. Volume Control: Adjust volume (k)
6. Contrast: Control contrast (k)
7. Brightness: Adjust brightness (k)
8. Color/Colour: Control color settings (k)
9. Tint: Adjust tint (k)
10. Sharpness: Control sharpness (k)
11. OSD Select: Select On-Screen Display (k)
12. Remote Control Lock Mode: Lock remote control settings (k)
13. Treble: Adjust treble (a)
14. Bass: Control bass (k)
15. Balance: Adjust balance (t)
16. Color Temperature: Set color temperature (c)
17. ISM Method: Adjust ISM method (d)
18. Equalizer: Control equalizer settings (j)
19. Energy Saving: Set energy-saving mode (j)
20. Tune Command: Control tuning (m)
21. Channel Add/Del(Skip): Add/Delete channels (m)
22. Key Control: Control key functions (m)
23. Backlight, Control Panel Light: Adjust backlight or panel light (k)
24. Input select (Main): Select main input source (b)
25. 3D: Control 3D settings (t)
26. Extended 3D: Extended 3D settings (v)
27. Auto Configure: Auto configuration settings (j)
These commands can be transmitted to the TV using the specified transmission protocol to control various functions and settings of the LG OLED Smart TV.
Add New Comment