User Manual Q&AAnswer
Nov 05, 2025 - 02:04 PM
**Installation of Outdoor Sensor:**
1. Mount the wireless 5-in-1 outdoor sensor in a location free of obstructions for accurate rain and wind measurements.
2. Ensure the sensor is facing north for correct wind direction alignment.
3. Follow the instructions in the manual for proper sensor installation.
**Setting Up Base Station:**
1. Insert batteries into the base station first before the outdoor sensor.
2. Place the base station close to the outdoor sensor for effective transmission.
3. Operate both the outdoor sensor and base unit within the effective transmission range.
**Interpreting Display Indicators:**
- **Time/Calendar/Moon Phases:** Displays time, date, day of the week, moon phase, and other relevant information.
- **Indoor/Outdoor Temperature and Humidity:** Shows current indoor and outdoor temperature and humidity levels.
- **Weather Trend:** Indicates the weather forecast for the next 12 hours.
- **Barometer:** Displays barometric pressure information.
- **Rainfall:** Shows current and historical rainfall data.
- **Wind Direction/Speed:** Indicates wind direction, speed, and gusts.
- **Wind Chill/Heat Index/Dew Point:** Provides information on perceived temperature, heat index, and dew point.
**Using Functions:**
- **Max/Min Values:** View and reset maximum and minimum recorded values.
- **Hi/Lo Alerts:** Set high and low value alerts for temperature, humidity, and other parameters.
- **Alarm Settings:** Configure alarms for specific weather conditions.
- **Weather Forecast:** Interpret the displayed weather trends for upcoming conditions.
- **History Data:** Access and review historical weather data for the past 24 hours.
Refer to the detailed instructions in the manual for specific steps on setting up and using the BRESSER 7002512 WTW 5 In 1 Weather Center.
Add New Comment