User Manual Q&AAnswer
Nov 05, 2025 - 12:35 PM
To set up remote access to view the camera feeds from outside the network using the Clinton Electronics CE-E04HDA 4CH-16CH Encoder, follow these steps based on the user manual:
1. **DDNS Setup:**
- From the main menu of the Encoder, navigate to System Setup > Network > DDNS.
- Set DDNS from OFF to ON.
- Select the DDNS server and enter a unique name for the Encoder (default is the MAC Address of the Encoder).
- Click on "DDNS Registration Test" to check if the name is available and register. Then, click on "DDNS Connection Test."
- If both tests are successful, click "Apply" to save the changes.
2. **Router Configuration:**
- From your router, ensure that the Encoder's IP Address and Web port are accessible from outside the network.
3. **Accessing the Encoder Remotely:**
- Open a web browser and enter either the IP Address of the Encoder or the URL from the DDNS Address.
- Log into the encoder as ADMIN with the unique password created during the initial setup.
- If the login credentials are correct, the live camera feed will be displayed. If there are login failures, re-enter the password or use the "Forgot Password" option.
By following these steps, you should be able to set up remote access to view the camera feeds from outside the network using the Clinton Electronics CE-E04HDA 4CH-16CH Encoder. If you encounter any difficulties or require further assistance, you can contact Clinton Electronics Technical Support Monday-Friday, between 8 AM to 5 PM (CST).
Add New Comment