User Manual Q&AAnswers
Nov 05, 2025 - 08:35 AM
To change the coil assembly on the METCAL MFR-1300 Series MFR System, follow these steps as outlined in the user manual:
1. **Maintenance Steps:**
- Remove the screws holding the coil assembly in place.
- Replace the coil assembly with part number MFR-HDCA.
- If the front seal (part number AC-SK1) is worn, replace it as well.
2. **Regular Maintenance:**
- Regularly check the instrument cord and incorporate it into standard operator maintenance procedures.
3. **Additional Information:**
- The coil assembly is a consumable item and may need to be replaced periodically for optimal performance.
- Always use genuine MFR replacement parts for any repairs or replacements to ensure proper functioning of the system.
By following these steps and using genuine replacement parts, you can effectively change the coil assembly on your METCAL MFR-1300 Series MFR System and maintain its performance.
Nov 05, 2025 - 08:36 AM
If you are experiencing issues with the wireless charging function of the Chargers W107 Car Wireless Charging Bracket, here are some troubleshooting steps you can follow based on the user manual:
1. **Check Compatibility:** Ensure that your phone is a compatible model with the device. The Chargers W107 is designed for use with various iPhone models, including iPhone 14, iPhone 13, and iPhone 12 series.
2. **Proper Placement:** Make sure your phone is placed correctly on the mounting area of the device, with a charging distance of 2-8mm. Avoid using protective covers thicker than 3mm and keep any metal or magnetic objects at least 6cm away from the back of the phone during charging.
3. **Temperature Consideration:** Charging speed can be affected by temperature. Avoid charging in hot and humid environments as this may impact the charging process.
4. **Original Accessories:** Always use the original charging cable and adapter provided with the device to ensure optimal performance.
5. **Indicator Lights:** Pay attention to the indicator lights on the wireless charger. The blue and green lights will turn on for 3 seconds before turning off. The standby green light will remain on while charging. If the blue light is breathing slow flashing, it indicates that charging is in progress. If there is any abnormality during charging, the green light will flash.
6. **FCC Compliance:** Ensure that the device is installed and operated with a minimum distance of 20cm between the radiator and your body to comply with FCC radiation exposure limits.
If you have followed these steps and are still experiencing issues with the wireless charging function of the Chargers W107 Car Wireless Charging Bracket, it is recommended to contact the manufacturer for further assistance or consider consulting a dealer or experienced technician for help.
Add New Comment