User Manual Q&AAnswer
Nov 03, 2025 - 09:43 AM
To switch between the feed and eject methods on the Canon ImageFORMULA DR-M140 Office Document Scanner, follow these steps:
1. **Switching the Feed and Eject Methods:**
- Use the Feed Selection Lever located on the front of the scanner.
- Set the lever to the lower position for consecutive document scanning (U-turn path).
- Set the lever to the upper position for scanning documents one page at a time or multi-page documents that are fastened together (straight path).
2. **Placing Documents:**
- Align the document guides with both edges of the document to ensure straight feeding.
- Place the documents in the document feed tray according to the selected feed and eject method.
3. **Scanning:**
- Once you have set the feed and eject method using the Feed Selection Lever, you can start scanning your documents accordingly.
- Ensure that the documents are properly aligned and placed in the feed tray before initiating the scanning process.
By following these steps and adjusting the Feed Selection Lever as needed, you can easily switch between the U-turn path and straight path feed and eject methods on the Canon ImageFORMULA DR-M140 Office Document Scanner. For more detailed instructions, refer to the user manual provided with the scanner.
Add New Comment