User Manual Q&AAnswer
Nov 03, 2025 - 08:44 AM
To connect and import Netatmo devices using the YOUVI Netatmo Bridge, follow these steps as outlined in the user guide:
1. **Setting up Netatmo units:**
- Use the supplied documentation to set up the desired Netatmo appliances.
2. **Installation:**
- Open the Dashboard page of the desired YOUVI server.
- Select the house of the desired add-on to install it and confirm the message.
- Under More > License, view the remaining days of your trial license.
- To purchase the add-on for unlimited use, visit the PEAKnx Shop.
3. **Preparation:**
- Select the "Connect" button to open the Netatmo page.
- Log in with your Netatmo account and grant YOUVI the necessary permissions.
- Once successfully connected, the status "Connected" will be displayed.
4. **Device import:**
- Click on the "Discover devices" button to view all devices found in Netatmo.
- Use checkmarks to select the devices you want to import into the visualization.
- Customize properties such as widget name, icon, and room placement.
- Click on "Create devices" to import the selected devices.
- Manage imported devices in the Devices drop-down menu.
5. **Visualization:**
- Switch to the visualization via the Dashboard page.
- Turn on Edit mode and navigate to the room overview to find the imported devices.
6. **Further instructions:**
- For additional guidance on using the Netatmo Bridge, refer to the YOUVI program help by selecting the help icon in the upper right corner of the respective page in YOUVI Configuration.
By following these steps, you can easily connect, import, and control your Netatmo devices using the YOUVI Netatmo Bridge within the PEAKnx visualization system.
Add New Comment