User Manual Q&AAnswer
Nov 02, 2025 - 12:03 PM
According to the user manual for the Halliburton Velocity Revolve Gun System, the assembly and deployment process is designed to be straightforward and efficient. Here is a general overview of the steps involved:
1. **Preparation:** Upon receiving the Velocity Revolve gun system at the wellsite, ensure that all necessary components are present and in good condition. Verify that the charges are pre-loaded and aligned as per the system's design.
2. **Insert Detonator:** A wireline crew will need to insert a detonator into the system. Follow the manufacturer's instructions for proper insertion and handling of the detonator.
3. **Assemble Bottomhole Assembly (BHA):** Assemble the final BHA by following the provided guidelines. Ensure that all components are securely connected and aligned.
4. **Run the System in Hole:** Once the BHA is assembled, the Velocity Revolve gun system can be run into the wellbore. Make sure to follow standard operating procedures for deploying downhole equipment.
5. **Deploy Charges:** When the system is in the desired position within the wellbore, deploy the charges by initiating the detonator. Follow all safety protocols and guidelines for detonating charges downhole.
6. **Post-Deployment Procedures:** After the charges have been detonated and the perforations made, retrieve the system from the wellbore following established procedures. Dispose of the system in accordance with environmental regulations.
It is essential to consult the detailed user manual provided by Halliburton for specific instructions, safety precautions, and any additional considerations related to the assembly and deployment of the Velocity Revolve Gun System. Always prioritize safety and compliance with industry standards when handling and deploying perforating equipment in well completions.
Add New Comment