User Manual Q&AAnswer
Oct 31, 2025 - 04:46 PM
To simulate the Image De-Noising Filter core using the provided testbench, follow these steps as outlined in the user guide:
1. **Create SmartDesign Testbench:**
- In the Libero SoC Design Flow window, expand Create Design and double-click Create SmartDesign Testbench.
- Enter a name for the SmartDesign testbench and click OK.
2. **Add Image De-Noise Filter Core:**
- In the Libero SoC Catalog, expand Solutions-Video, and drag the Image De-Noise Filter IP core onto the SmartDesign testbench canvas.
3. **Promote Ports:**
- Select all the ports of the core, right-click, and click Promote to Top Level.
4. **Generate Component:**
- Click the Generate Component icon on the SmartDesign Toolbar to create the Image De-noising Filter SmartDesign component.
5. **Import Testbench Input Image:**
- Navigate to the sample testbench input image file in the Libero SoC Files window and import it.
6. **Simulate the Design:**
- In the Stimulus Hierarchy, right-click the Image De-noising Filter testbench file and select Simulate Pre-Synth Design, then Open Interactively.
7. **Complete Simulation:**
- If the simulation is interrupted due to runtime limits, use the run -all command to finish the simulation.
8. **View Simulation Results:**
- After simulation completion, the testbench output image file (.txt) will be available in the simulation folder.
By following these steps, users can effectively simulate the Image De-Noising Filter core using the provided testbench and analyze its functionality in denoising images.
Add New Comment