User Manual Q&AAnswer
Oct 31, 2025 - 01:03 PM
To change the color and lighting effects of the LED light strip using the remote control, follow these steps based on the provided manual:
1. **Color Selection:**
- Press the color selection buttons on the remote control to change the color of the LED light strip.
- CS 1: Press repeatedly to cycle through 16 different colors.
- C3: Choose from 3 colors (Red, Green, Blue).
- C7: Select from 7 available colors.
- C16: Choose from a palette of 16 colors.
2. **Program Selection:**
- Use the program selection buttons on the remote control to change the lighting effects.
- Flash: LED brightness changes from minimum to maximum in a single color or multiple colors.
- Meteor: Group of 21 LEDs gradually dim towards the end of the strip and then restart from the beginning.
- Auto Select: Automatically cycles through all programs and colors without pre-selection.
- Circulation: Groups of various color LEDs move from the beginning to the end of the strip.
- Jump: LED strip illuminates at maximum brightness and cycles on and off.
3. **Light Flow Direction:**
- Use the direction buttons to control the direction of the light flow.
- Determine how the LEDs turn on or off, move across the strip, or form groups based on the direction buttons.
4. **Grouping and Color Control:**
- Understand that groups of LEDs represent the same color and can move or change intensity based on the selected program and color.
By following these instructions and experimenting with the remote control functions, you can customize the color, lighting effects, and direction of the LED light strip to suit your preferences and create different ambiance in your space.
Add New Comment