User Manual Q&AAnswer
Oct 31, 2025 - 11:30 AM
To clone/copy the EDID from a display using the StarTech VSEDIDDVI DVI DDC EDID Ghosting Emulator, follow these steps:
1. Set the rotary dial on the emulator to position 1.
2. Connect the USB to DC power cable from the emulator to an available USB port on the video source device (may need to be powered on) or display device. The Status LED will light up blue.
3. Connect the EDID compliant display device to the Monitor port on the emulator using the appropriate type of DVI cable (DVI-D, dual or single link). Power on the display device.
4. Press and hold the EDID PROGRAM button on the emulator until the Status LED starts to flash green. The LED will flash green/red while copying.
5. Once the Status LED returns to blue, the EDID Copy has completed successfully.
By following these steps, you can successfully clone/copy the EDID from a display device using the StarTech VSEDIDDVI DVI DDC EDID Ghosting Emulator as outlined in the instruction manual provided with the product.
Add New Comment