How do I set up the 2CONNET M930Z Wired 1D 2D QR Handheld Barcode Scanner for optimal scanning performance? (2CONNET M930Z Barcode Scanner User Guide)

Answer

manuals.plus

Oct 31, 2025 - 10:55 AM


To set up the 2CONNET M930Z Wired 1D 2D QR Handheld Barcode Scanner for optimal scanning performance, follow these steps:



1. **Maintain Proper Bevel Angle:** Ensure you maintain a 10-40° bevel angle in the horizontal direction of the scanner and the barcode for optimal scanning results.



2. **Interface Cable Installation:** When connecting the data cable, make sure not to pull it out as it is integrated with the scanner interface.



3. **Parameter Barcode Setup:** Scan the corresponding barcodes to set up the scanner. The scanner will beep once to confirm the setup.



4. **System Setting:** Enable the configuration code function by reading the "Enable configuration code" barcode. This allows you to configure the scanner by reading specific barcodes. Disable this function by reading the "Disable configuration code" barcode.



5. **Common Settings:** You can choose to output or not output the configuration code content. Read the "output configuration code content" or "no output configuration code content" barcodes accordingly.



6. **User Default Settings:** Save your frequently used settings as user default settings by reading the "save current settings as user default settings" barcode. Restore to user default settings by reading the "restore to user default settings" barcode.



7. **Interface Setting:** Adjust scan mode and terminator suffix settings as needed.



8. **Troubleshooting:** Refer to the troubleshooting section in the user guide for common issues and solutions related to power, connection, decoding, input method errors, region configuration, and other faults.



By following these setup instructions and troubleshooting tips, you can ensure optimal performance from your 2CONNET M930Z Wired 1D 2D QR Handheld Barcode Scanner.