User Manual Q&AAnswer
Oct 30, 2025 - 01:26 PM
To connect and set up the MIBOXER FUT038W LED Controller for the first time, follow these steps as outlined in the instruction manual:
1. **Network Configuration:**
- Connect the controller to the power supply.
- Confirm that the indicator light is flashing quickly (2 flashes per second). If not, you can enter this state by:
- Long pressing the "SET" key until the indicator light flashes quickly.
- Power off and on the controller 3 times.
2. **Connect to WiFi:**
- Connect your phone to your home WiFi network operating in the 2.4GHz frequency.
- Open the homepage of the app ([MiBoxer Smart] or [Tuya Smart]) and click the "+" button at the upper right corner of the page.
- Follow the app prompts to complete the configuration.
3. **Additional Tips:**
- Make sure the voltage of the power supply matches the requirements of the light to avoid damage.
- Double-check the connections to ensure correct polarity and no short circuits before turning on the power.
- Avoid dismantling the lighting fixtures if you are not a professional.
- Keep the light away from areas with a wide range of metal or strong electromagnetic waves to prevent interference with the remote distance.
By following these steps, you should be able to successfully connect and set up your MIBOXER FUT038W LED Controller for the first time.
Add New Comment