User Manual Q&AAnswer
Oct 29, 2025 - 11:38 AM
#### Initializing the Device:
1. **Step 1:** Double-click on ConfigTool.exe to open the tool.
2. **Step 2:** Click on "Modify IP."
3. **Step 3:** Click on "Search Setting."
4. **Step 4:** Select the searching way:
- Current Segment Search (default): Enter the username and password for the system to search devices.
- Other Segment Search: Enter the IP address range for the system to search devices.
5. **Step 5:** Click "OK."
6. **Step 6:** Select the uninitialized devices and click on "Initialize."
7. **Step 7:** Set and confirm the password, enter a valid email address, and click "Next."
8. **Step 8:** Select Easy4ip or Auto-check for updates as needed and click "OK."
9. **Step 9:** Click "Finish."
#### Changing Device IP Address:
1. **Step 1:** Search for devices on your network segment following the steps in "Initializing Device."
2. **Step 2:** Select the devices needing IP address changes and click on "Batch Modify IP."
3. **Step 3:** Select Static mode and enter the new IP address, subnet mask, and gateway.
4. **Step 4:** Click "OK."
#### Logging in to Web Page:
1. **Step 1:** Open an IE browser, enter the device's IP address, and log in with the username and password.
2. **Step 2:** If prompted, download and install the plugin.
3. **Step 3:** The home page will be displayed after plugin installation.
These steps are based on the information provided in the Dahua N22AL12 Dome Network Camera user manual. For detailed instructions and visuals, refer to the manual or contact Dahua customer support for assistance.
Add New Comment