User Manual Q&AAnswer
Oct 29, 2025 - 10:57 AM
To link the PHILIPS UID8450 ZigBee Green Power Switch and Scene Selector into an existing network, you need to follow the commissioning (linking) procedure. Here are the steps to link the device into your network:
1. **Commissioning (Linking):**
- Before using the ZGP devices, they have to be linked into an existing network.
- For the UID8450, the rocker/button needs to be removed before the procedure to link it into the network can be performed.
- For details on the linking procedure, refer to the installation instructions or application guides provided with the product.
2. **UID8450 Usage:**
- The UID8450 is a switch and dim device. Briefly pressing the upper or lower part of the device will either switch the indirectly connected light(s) on or off.
- A press and hold action will engage the dim-up or dim-down function.
3. **UID8460 Usage:**
- The UID8460 is a scene selector, including switch off, device. Briefly pressing one out of three buttons will initiate a scene preset recall, and indirectly connected light(s) will respond accordingly.
- There are three light levels and a lights off function available. Please note that it is not possible to set scene levels as this device only has a recall function.
4. **Application Example:**
- An application example of one UID8450 (switch and dim) combined with one UID8460 (scene selector), one OccuSwitch Wireless multi-sensor, and a number of ActiLume Wireless DALI gen2 systems is provided in the user manual.
By following these steps and referring to the detailed instructions provided in the user manual, you should be able to successfully link your PHILIPS UID8450 ZigBee Green Power Switch and Scene Selector into your existing network.
Add New Comment