User Manual Q&AAnswer
Oct 28, 2025 - 09:20 AM
To change the MIDI program change numbers or control change numbers on the FREE THE ONE MC-3 Midi Controller, follow these steps:
1. **Entering Edit Mode:**
- Press and hold the EDIT button for about three seconds to enter Edit mode. The LED above the EDIT button will illuminate, indicating you are in Edit mode.
2. **Selecting Operation Mode:**
- Use the INC and DEC switches to navigate through the different settings on the display.
- Set the operation mode to either Mode-1 (Program Change Number Send mode) or Mode-2 (Preset mode) based on your preference.
3. **Adjusting Program Change Numbers:**
- In Mode-1, use the SW1/DEC and SW2/INC switches to decrement or increment the program change number you want to send.
- Press the SW3/ENTER/STORE switch to confirm and send the selected program change number.
4. **Adjusting Control Change Numbers:**
- In Mode-2, you can preset a program change number or control change number for each footswitch (SW1, SW2, SW3).
- Use the INC and DEC switches to set the desired control change number.
- Set the MIDI channel and operation type for the switch by navigating through the options and confirming your selections.
5. **Exiting Edit Mode:**
- To exit Edit mode, press the EDIT button again. The LED above the EDIT button will turn off, indicating you have exited Edit mode.
By following these steps, you can easily adjust the MIDI program change numbers or control change numbers on the FREE THE ONE MC-3 Midi Controller to suit your preferences and needs.
Add New Comment