User Manual Q&AAnswer
Oct 28, 2025 - 09:09 AM
According to the user manual for the DCSEC HD 1080P 2MP 180 Degree Surveillance Security Camera, you can change the camera mode to work with your specific DVR type by following these steps:
1. **Using OSD Control:**
- Connect the camera to a DC12V power adaptor.
- To switch to AHD: Press and hold the Upward button for 10 seconds.
- To switch to TVI: Press and hold the Leftward button for 10 seconds.
- To switch to CVBS: Press and hold the Rightward button for 10 seconds.
- To switch to CVI: Press and hold the Downward button for 10 seconds.
2. **Using Camera Menu:**
- Press the middle of the OSD button to access the camera menu.
- Navigate to VIDEO SETTING.
- Change HD from CVBS to CVI/TVI/AHD according to your DVR type.
- Change STANDARD from NTSC to 1080P 30 or 720P 30 according to your DVR type.
- Apply the changes and reboot the camera.
It's essential to ensure that if your DVR is a traditional 960H DVR, you should keep the camera in 960H CVBS working mode to avoid any issues with image display.
If you encounter any difficulties or have further questions about the camera usage or settings, you can reach out to the manufacturer, DCSEC Technology Co.,Ltd, via the provided email. They are available to assist you with any queries you may have.
Add New Comment