User Manual Q&AAnswer
Oct 27, 2025 - 04:21 PM
To switch between systems (Windows and Mac) and modes (2.4G, BT1, BT2) on the OEM M10 Three-Mode Rechargeable Wireless Mouse, follow these steps as outlined in the product manual:
1. **System Switching (Windows/Mac):**
- The LOGO indicator on the mouse indicates the system. The default system is Windows.
- To switch to the Mac system: Long press for 5 seconds → LOGO blue light on for 30 seconds → WIN system → Long press for 5 seconds → LOGO green light for 30 seconds → OS X system.
- For example: If your device is a Mac, connect the mouse and then switch to the Mac system by following the above steps.
2. **2.4G Wireless Connection (Red Light):**
- Insert the receiver from the mouse (USB receiver bin) into the USB interface of the computer.
- Switch the mouse power switch to ON within a distance of more than 30cm from the mouse receiver.
- Press the mouse button to start using it.
3. **Bluetooth Connection:**
- For Windows 10 (Green Light): Turn ON the mouse power switch, turn the Bluetooth pairing switch to BT1.
- Follow the steps in the manual to connect the Bluetooth mouse to your Windows 10 device.
- For Mac (Blue Light): Turn ON the mouse power switch, turn the Bluetooth pairing switch to BT2.
- Follow the steps in the manual to connect the Bluetooth mouse to your Mac device.
4. **Other Features:**
- DPI/Lamp Control Adjustment: Short press DPI to adjust DPI settings and control the RGB lamp.
- 2.4 Wireless/Bluetooth Switching: Press the mode switch to select the device you want to connect.
- Shut Down the Mouse: Turn the toggle switch to the OFF position when the mouse is not in use to save power.
By following these instructions, you should be able to effectively switch between systems and modes on your OEM M10 Three-Mode Rechargeable Wireless Mouse.
Add New Comment