User Manual Q&AAnswer
Oct 27, 2025 - 03:30 PM
To program the CE-S Control Element for your specific application, follow these steps:
1. Ensure that the control panel is in programming mode.
2. Use the Programming Tool to assign an address to the Control Element.
3. If the CE-S is configured as a remote signal circuit, make sure there is an End of Line (EOL) device in place for programming.
4. Refer to the IXL Programming Manual for CE-S and system configuration programming details.
By following these steps and referring to the provided manuals, you can successfully program the CE-S Control Element for your fire alarm system.
Add New Comment