User Manual Q&AAnswer
Oct 21, 2025 - 09:34 AM
To adjust the output current of the OSRAM OT Wi LED Power Supply, you can use Near Field Communication (NFC) in mains off mode only. Here is a step-by-step guide based on the provided manual:
1. Make sure the mains power is turned off before attempting to adjust the output current.
2. Use programming software via NFC to adjust the output current. For detailed instructions on how to use NFC, please refer to Tuner4TRONIC at www.osram.com/ds.
3. Remember that the unit can be permanently damaged if mains power is applied to the terminals 21/23.
4. The adjustment of the output current should be done carefully and precisely to ensure proper functionality of the LED power supply.
By following these steps and referring to the provided manual for additional guidance, you should be able to adjust the output current of the OSRAM OT Wi LED Power Supply effectively and safely.
Add New Comment