User Manual Q&AAnswer
Oct 20, 2025 - 06:36 PM
According to the owner's manual, the address of the AD355(A) detector can be easily viewed and changed without the need for electronic programmers. Here's how you can change the address:
1. **Locate the Addressing Feature:** The AD355(A) detector has a rotary, decimal addressing system. The address range varies depending on the Fire Alarm Control Panel you are using. For example, with the MS-9600UDLS and MS-9600LS series systems, the address range is 01-159, and with the MS-9200UDLS(C) Firmware 4, the address range is 01-99.
2. **Changing the Address:** To change the address of the detector, you can manually rotate the address setting on the detector itself. This allows you to select the desired address within the specified range without the need for additional tools or equipment.
3. **Verification:** After changing the address, you can verify the new address by checking the display on the detector. The LEDs on the detector provide a visual indication of the address setting, making it easy to confirm the changes you have made.
By following these steps outlined in the manual, you can easily change the address of the AD355(A) detector to suit your specific installation requirements without the need for electronic programmers.
Add New Comment