How can I connect the netvox R207C Wireless IoT Controller External Antenna to my network and set it up for use? (netvox R207C External Antenna User Manual)

Answer

manuals.plus

Oct 20, 2025 - 05:08 PM

To connect and set up the netvox R207C Wireless IoT Controller with External Antenna, follow these steps based on the user manual:

1. **WAN/LAN Connection:**

- Connect the network source to the RJ45 port (WAN/LAN) of the R207C. Ensure the network source supports static IP or DHCP client.

- If you need to connect an external IP Camera, connect it to another router on the same network segment.

2. **Power On:**

- Plug in the 5V/1.5A transformer to power on the R207C.

3. **Reboot:**

- To restart the R207C, press the reset button at the bottom. Hold the button for more than five seconds to restore to factory settings.

4. **Indicator:**

- The cloud indicator will stay on when connected to the cloud and flash when not connected.

5. **Set up R207C:**

- Connect the R207C to the network source and power supply. Ensure the network source router has DHCP enabled to view the DHCP List.

6. **Inquire R207C IP Address:**

- Open a web browser, log in to the router settings, and find the DHCP List to locate the R207C IP address and MAC Address for login.

7. **Login R207C Management Interface:**

- Enter the R207C IP address in the URL bar to access the settings interface.

- Use the default username and password provided in the manual to log in. Change the password for security.

8. **Gateway Function Description:**

- Explore functions like Status, Internet Settings, Administration, Statistics, Time Zone Setting, Firmware Upgrade, Save/Load Settings, Password, Smart Home features, User Management, Upgrade Module, Data Management, Communication Setting, Cloud Link, and System Settings.

9. **Important Maintenance Instructions:**

- Follow maintenance guidelines to keep the device dry, avoid extreme temperatures, handle with care, avoid harsh chemicals, and handle batteries properly.

By following these steps and referring to the manual for detailed instructions, you can successfully connect and set up the netvox R207C Wireless IoT Controller with External Antenna for use in your IoT network.