User Manual Q&AAnswer
Oct 20, 2025 - 02:05 PM
To connect the PROWIFI-EU Wireless Communication Module to your PRO Series Control Panel, follow these steps:
1. Ensure all electrical power is removed from the control panel before installation.
2. If the Control Panel is powered up, disarm the system, wait 30-60 seconds, remove the panel front cover, unplug the Power Supply DC connector, and disconnect the battery cables.
3. Insert the module into the slot on the left side of the control panel and ensure it is securely seated on the edge connector.
4. Secure the module to the control panel with the provided xxxx .
5. If no other modules need to be installed, connect the Power Supply DC connector and the battery cables to the control panel.
6. Reinstall the control panel front cover and secure it with the xxxx .
7. For programming, ensure you have a router and internet service for Wi-Fi connection. Refer to the Control Panel's Installation Instructions for detailed programming steps.
8. Programming associated with the module and Z-Wave device inclusion/exclusion is done through the AlarmNet 360™ cloud-based management platform. Enroll the keypad in the Control Panel before use.
9. Once programming is complete, perform a Communications Test to ensure proper functionality.
By following these steps and referring to the detailed instructions in the manual, you can successfully connect the PROWIFI-EU Wireless Communication Module to your PRO Series Control Panel for enhanced communication capabilities.
Add New Comment