User Manual Q&AAnswer
Oct 20, 2025 - 10:34 AM
To address the N-ANN-I/O LED Driver Module on the ANN-BUS communication circuit, each device must have a unique address (ID Number) to communicate effectively with the FACP. Here are the steps to address the N-ANN-I/O module:
1. **Unique Address:** Ensure that each N-ANN-I/O module connected to the ANN-BUS has a distinct address to prevent communication conflicts.
2. **Device Addressing:** Refer to the FACP manual for detailed instructions on assigning a unique address (ID Number) to the N-ANN-I/O module. Typically, you will need to follow a specific addressing procedure outlined in the manual.
3. **Maximum Devices:** Note that a maximum of eight devices can be connected to the FACP ANN-BUS communication circuit. Ensure that the total number of devices does not exceed this limit.
4. **Consult Manual:** If you encounter any difficulties or require further clarification on addressing the N-ANN-I/O module, refer to the detailed instructions provided in the FACP manual or contact Notifier for additional support.
By following these steps and referring to the relevant manuals, you can successfully address the N-ANN-I/O LED Driver Module on the ANN-BUS communication circuit for seamless integration with the Fire Alarm Control Panel.
Add New Comment