User Manual Q&AAnswer
Oct 19, 2025 - 04:12 PM
To link the Multi-Scene Station (MSS) to a compatible controller, follow these steps as outlined in the installation guide:
1. Ensure that the target controller is installed, powered, and within range of the MSS.
2. Press the [Learn] button on the controller to activate Link mode. Refer to the controller's product documentation if needed.
3. Press the [Teach] button on the side of the MSS once to send a link message to the controller.
4. Deactivate Link mode on the controller before attempting to link to any other controllers.
5. Test the operation by pressing the buttons on and off to control the lighting scenes.
If the linking process fails, you can check the battery or run a Range Confirmation test to confirm adequate signal strength. The MSS and controller should be within range for successful communication and operation.
Remember that the MSS can be linked to multiple controllers to manage different lighting circuits effectively. Follow the steps carefully to ensure proper linking and seamless operation of your lighting system.
Add New Comment