How to remove the Smart Module or perform a factory reset if needed? (Yale YRC652-ZW2 Interconnected Key User Manual)

Answer

manuals.plus

Oct 19, 2025 - 02:05 PM

#### Adding Yale Z-Wave Plus Smart Module:

1. **Installation**: Insert the Yale Smart Module into the slot above the battery compartment. Ensure batteries are removed before inserting or removing the Smart Module.

2. **Enrollment**:

- Open the Z-Wave system's smart home or alarm app on your device.

- Follow the in-app instructions for adding a new device.

- On the lock keypad, enter your master entry code followed by the icon.

- Press the 7 key followed by the icon.

- Press the 1 key followed by the icon.

#### Removing Yale Z-Wave Plus Smart Module:

1. **Unenrollment**:

- On the lock keypad, enter your master entry code followed by the icon.

- Press the 7 key followed by the icon.

- Press the 3 key followed by the icon.

- Open the Z-Wave system's smart home or alarm app and follow the instructions for removing a device.

- Remove the Yale Smart Module from the slot above the battery compartment.

#### Factory Reset:

- **Manual Factory Reset**: Perform a power cycle while holding the button on the inside lock escutcheon. Refer to the lock installation manual for specific details. Use the manual factory reset procedure only when the network primary controller is missing or inoperable.

These steps should help you with adding, removing, and resetting the Yale Z-Wave Plus Smart Module for your Assure Lock and Z-Wave system. For detailed instructions, refer to the Yale Z-Wave Plus Smart Module Installation Guide provided in the manual.