How can I add a new device to my Rently Smart Home system? (Rently Smart Home Security User Guide)

Answer

manuals.plus

Oct 18, 2025 - 07:52 PM


To add a new device to your Rently Smart Home system, follow these steps:



1. **Register Device:** Ensure the new device is compatible with the Rently system. Check the Rently website or contact customer support for compatibility information.



2. **Connect Hub:** Make sure your Rently hub is powered on and connected to the internet. The hub acts as the central communication point for all devices in your smart home.



3. **Access Manager Portal:** Log in to the Manager Portal using your credentials. This portal allows you to remotely manage all your Rently-enabled devices.



4. **Add Device:** Look for an option to add a new device within the Manager Portal interface. Follow the on-screen instructions to add the new device to your system.



5. **Pairing Process:** Depending on the type of device, you may need to follow specific pairing instructions. Refer to the device's user manual for detailed pairing steps.



6. **Testing:** Once the device is added, test its functionality to ensure it is properly integrated into your smart home system.



7. **Troubleshooting:** If you encounter any issues during the setup process, refer to the device manual or contact Rently customer support for assistance.



By following these steps, you can successfully add a new device to your Rently Smart Home system and enjoy the benefits of a fully integrated smart home experience.