User Manual Q&AAnswer
Oct 18, 2025 - 07:07 PM
According to the user guide provided for the Q-SYS TSC-50t-G3 Tabletop Stand Accessory, here is a step-by-step guide on how to assemble and install the stand for both movable and fixed installation options:
**Movable Installation:**
1. **Caution:** Do not attempt to assemble or disassemble the stand while the touch screen controller is attached.
2. **Orient Docking Plate 1 (TSC-50t-G3 Only)**
3. **Remove Base 2 (Method 1):**
- Route Cable
- Install Base
- Connect Cable to Touchscreen Controller
**Fixed Installation:**
1. **User Supplied Parts:**
- Lock/Jam Nut (or Similar)
- Mounting Pipe (3/4" NPS)
- Rubber/Foam Washer (Optional)
2. **Assembly and Installation:**
- Orient Docking Plate 1 (TSC-50t-G3 Only)
- Drill Hole
- Install Threaded Pipe
- Route Cable
- Connect Cable to Touchscreen Controller
- Assemble Touchscreen Controller to Stand
For detailed instructions and illustrations, please refer to the user guide provided with the product or visit the QSC website for additional resources.
Add New Comment