User Manual Q&AAnswer
Oct 18, 2025 - 04:28 PM
To set up the network connection for the Hosonsoft HS/D-YF-A0-005 Professional Digital Printing Software, follow these steps based on the provided manual instructions:
1. **Gigabit NIC Judgment:**
- Before connecting to the network, ensure that your computer's Network Interface Card (NIC) is a Gigabit NIC for proper connection.
- Check the network adapter in the device manager to determine if it is a Gigabit NIC. Look for characters like Gigabit, GBE, 10/100/1000M, or RTL8169 to confirm.
2. **Network Settings:**
- First-time setup requires configuring network connection parameters.
- Go to the Advanced menu and select Network Settings.
- Set the local IP address to 192.168.127.111 (first three digits can be any number within 1-255 except for 10).
- Click "Settings" to save the configuration and check network accessibility.
3. **Troubleshooting Network Connection:**
- If unable to connect, follow these steps:
- Go to Control Panel > Network and Internet > View network status and tasks > Change adapter settings.
- Click on Ethernet or Local Area Connection, then go to Properties.
- Enter the same IP address (192.168.127.111) and click OK to save the settings.
- Check the main interface window for a green icon at the lower left corner to confirm online status. If red, unplug and reconnect the network cable.
By following these steps, you can successfully set up the network connection for the Hosonsoft HS/D-YF-A0-005 Professional Digital Printing Software as per the provided manual instructions.
Add New Comment