User Manual Q&AAnswer
Oct 18, 2025 - 01:24 PM
To connect additional Logitech wireless devices that are Unifying-ready to the same Logitech Unifying receiver that comes with your Wireless Combo MK330, follow these steps:
1. Make sure your Unifying receiver is plugged into a USB port on your computer.
2. Download the Logitech Unifying software from www.logitech.com/unifying if you haven't already.
3. Start the Unifying software and follow the onscreen instructions to pair the new wireless device with your existing Unifying receiver.
4. You can find the Unifying software by going to Start / All Programs / Logitech / Unifying / Logitech Unifying Software.
If you encounter any issues during the setup process, here are some troubleshooting tips provided by the user guide:
- Ensure that the mouse and keyboard are powered on.
- Check that the Unifying receiver is securely plugged into a computer USB port. Try changing USB ports if needed.
- If the Unifying receiver is connected to a USB hub, plug it directly into a USB port on your computer.
- Make sure you have removed the battery tab on the mouse and keyboard. Check the battery orientation and replace them if necessary.
- Remove any metallic objects between the mouse/keyboard and the Unifying receiver.
- Try moving the Unifying receiver closer to the mouse and keyboard.
- Reconnect the mouse/keyboard and Unifying receiver using the Logitech Unifying software if needed.
If you require further assistance or have any feedback, you can contact Logitech customer support using the contact information provided in the user guide.
Add New Comment