User Manual Q&AAnswer
Oct 18, 2025 - 01:22 PM
To install the Logitech Rally Mounting Kit, follow these steps as outlined in the installation instructions provided by Logitech:
1. **Tools Required:** You will need a Phillips screwdriver and a 7 mm nut driver for the installation process.
2. **Prepare the Mounting Surface:** Ensure that the mounting surface is stable, secure, and capable of supporting the weight of the Rally components.
3. **Mounting the Camera:**
a. Attach the camera bracket to the Rally Camera using the provided screws.
b. Secure the camera bracket to the wall or ceiling using appropriate screws or anchors.
4. **Mounting the Speaker:**
a. Attach the speaker bracket to the Rally Speaker using the provided screws.
b. Secure the speaker bracket to the wall or ceiling using appropriate screws or anchors.
5. **Mounting the Table Hub:**
a. Attach the table hub bracket to the Rally Table Hub using the provided screws.
b. Secure the table hub bracket to the table or other surface using appropriate screws.
6. **Cable Management:**
a. Route the cables through the cable retainers on the mounting brackets to keep them organized and out of the way.
b. Use cable clips or ties to secure the cables along the mounting surface for a clean installation.
7. **Final Checks:**
a. Ensure that all components are securely mounted and stable.
b. Double-check the connections and cable routing for proper functionality.
For more detailed instructions and illustrations, refer to the Logitech Rally Mounting Kit installation guide available at
By following these steps carefully and referring to the provided instructions, you can successfully install the Logitech Rally Mounting Kit for your Rally system.
Add New Comment