User Manual Q&AAnswer
Oct 17, 2025 - 08:26 PM
To set up remote access to your uniview 3101C0FC NVR for viewing cameras from a mobile device, follow these steps:
1. **Access Using a Web Browser:**
- Enter the NVR's default IP address (192.168.1.30) in the address bar of a web browser (e.g., Internet Explorer) on a connected computer.
- Install the plugin as prompted.
- Log in with the default admin username (admin) and password (123456) or the updated credentials if changed.
2. **Access from Mobile App:**
- Scan the QR code on the NVR device to download the mobile app.
- Install the app and sign up for a cloud account.
- Use the app to scan the QR code again to add the NVR.
- Access your NVR from your mobile phone anytime anywhere.
3. **Note:**
- Ensure your NVR is connected to a router with an internet connection for remote access.
- If the app is not available by scanning the QR code, contact your local dealer for assistance.
By following these steps, you should be able to set up remote access to your uniview 3101C0FC NVR for viewing cameras from a mobile device as per the user manual instructions.
Add New Comment