User Manual Q&AAnswer
Oct 17, 2025 - 04:35 PM
According to the owner's manual, the POTTER PIR-TECT 1 Dual PIR External Motion Detector offers field programmable beam range options of 30ft, 65ft, or 98ft. To adjust the detection range, follow these steps:
1. **Access the Programming Mode:** Enter the programming mode of the motion detector. This typically involves using the control panel or interface provided with the detector.
2. **Select Desired Range:** Once in the programming mode, navigate to the section that allows you to adjust the detection range. Choose between the available options of 30ft, 65ft, or 98ft based on your requirements.
3. **Save Settings:** After selecting the desired range, make sure to save the settings to ensure that the motion detector operates at the chosen detection distance.
4. **Testing:** It is recommended to test the motion detector after adjusting the range to confirm that it is detecting motion accurately at the new distance.
By following these steps outlined in the owner's manual, users can easily adjust the detection range of the POTTER PIR-TECT 1 Dual PIR External Motion Detector to best fit their security setup.
Add New Comment