User Manual Q&AAnswer
Oct 17, 2025 - 01:32 PM
The automatic restarting of the dash camera could be due to various reasons as outlined in the user manual. Here are some troubleshooting steps to address this issue:
1. **Check USB Cable Connection:** Ensure that the USB cable connecting the dash camera to the power source is securely connected and not loose. Poor contact with the USB cable can lead to automatic restarts.
2. **MicroSD Card Issue:** Remove the microSD card from the dash camera and check if the automatic restarts persist. If the issue stops when the microSD card is removed, it could indicate a problem with the card. Try formatting the microSD card or using a different Class 10 microSD card from a reputable brand.
3. **Factory Reset:** If the problem continues, you can perform a factory reset by inserting a pin into the Reset Hole as instructed in the manual. This may help resolve any software glitches causing the automatic restarts.
4. **Contact Support:** If the issue persists after trying the above steps, it is recommended to reach out to technical support for further assistance. They may provide additional troubleshooting steps or recommend a solution based on the specific issue with your dash camera.
By following these steps and referring to the troubleshooting guide provided in the user manual, you should be able to address the automatic restarting issue with your Biuone A20 Dash Cam for Cars.
Add New Comment