User Manual Q&AAnswer
Oct 16, 2025 - 03:49 PM
To program the Mircom MIX-5351HAPA sensor for different temperature settings, follow these steps:
1. **Select Desired Temperature Setting:** The sensor can be programmed as a fixed temperature sensor at 135°F, a rate of rise and 135°F fixed temperature sensor, or a high-temperature sensor at 190°F.
2. **Use Fire Alarm Control Panel (FACP):** The programming of the sensor is done through the Fire Alarm Control Panel. Ensure that the FACP supports the features you wish to program on the sensor.
3. **Set Address:** Use the rotary dial switches provided on the sensor to set the sensor's address. This is crucial for proper communication with the control panel.
4. **LED Indication:** The sensor has two LEDs that provide local indication. The LEDs can operate in three ways—on, off, and blinking—and can be set to red, green, or amber. The panel controls the LED operation.
5. **Remote Output:** The remote output may be synchronized to the LED operation or controlled independently. Refer to the operation manual for specific details on this feature.
6. **Testing:** After programming, test the sensor using the methods outlined in the manual. Testing ensures that the sensor functions correctly at the programmed temperature settings.
7. **Maintenance:** Periodically test and maintain the sensor as per the guidelines provided in the manual to ensure optimal performance.
By following these steps and referring to the Mircom MIX-5351HAPA manual for detailed instructions, you can effectively program the sensor for different temperature detection settings.
Add New Comment