User Manual Q&AAnswer
Oct 16, 2025 - 12:57 PM
To set up the Denver DVB-T2 H.265 Set Top Box for the first time, follow these steps based on the information provided in the user manual:
1. **Installation Guide:**
- During the first installation, you need to set up important configurations. This includes selecting the OSD language, country, FTA Only, Search Mode, Antenna Power, and Channel Search.
- Once you have completed the initial setup, choose "Channel Search" and press "OK" to search for channels.
2. **Display Information Of Programs:**
- Press the "INFO" key on the remote control to show information about the current program being played.
3. **Search Modes:**
- There are six types of installation modes available:
- Search Mode
- FTA Only
- Auto Search
- Manual Search
- Country
- Antenna Power
- Use the remote control to navigate through these modes and make selections based on your preferences.
4. **System Setup:**
- The System setup menu provides options for convenient system setup. This includes Parental Guidance, Lock Control, Factory Reset, System Information, Software Upgrade, Network Setting, and Power On Control.
5. **Parental Guidance:**
- The default password for Parental Guidance is "000000", and the master code is "873543".
- You can lock the menu of channel edit and searching by turning on "menu lock".
- Setting parental rating to "18 years" can lock adult channels.
6. **Software Upgrade:**
- You can upgrade the software via USB. Ensure not to power off the device during the upgrade process. Once the upgrade is complete, the system will automatically restart with the new firmware.
7. **Network Setting:**
- In the "Internet" menu, you can select the network type and basic settings for network connectivity.
By following these steps and utilizing the information provided in the user manual, you can successfully set up and configure your Denver DVB-T2 H.265 Set Top Box for optimal performance.
Add New Comment