User Manual Q&AAnswer
Oct 14, 2025 - 11:38 AM
Safety is paramount when operating the GYS 400T DUO MIG-MAG - TIG - MMA Welding Machine. Here are the key safety instructions you need to follow:
1. **Protective Gear:**
- Wear insulating, dry, and fireproof clothing without lapels to protect yourself from burns and radiation.
- Use protective gloves that provide electrical and thermal insulation.
- Use welding protection and a welding helmet with a sufficient level of protection. Avoid wearing contact lenses.
2. **Work Environment:**
- Ensure good air circulation in the work area.
- Keep hands, hair, and clothing away from moving parts.
- Do not remove cooling unit housing protections when the welding power source is live.
3. **Protecting Others:**
- Section off the welding area with fireproof curtains to protect against arc radiation and hot spatter.
- Inform people in the welding area not to stare at the arc rays or molten parts.
- Wear noise protection headphones if the welding process becomes louder than the permissible limit.
4. **Welding Fumes and Gas:**
- Ensure sufficient ventilation and consider using an air-fed mask if needed.
- Check the extraction system's performance against safety standards.
- Avoid welding in confined spaces and remove grease from parts before welding.
5. **Risk of Fires and Explosions:**
- Fully shield the welding area from flammable materials.
- Keep fire-fighting equipment nearby.
- Avoid welding in closed containers or tubes with flammable materials.
6. **Gas Cylinders:**
- Store gas cylinders in well-ventilated areas and keep them away from heat sources.
- Do not weld a pressurized cylinder and ensure the gas used is suitable for the welding process.
7. **Electrical Safety:**
- Ensure the electrical network is earthed and use the recommended fuse size.
- Never touch live parts connected to the welding circuit.
- Disconnect the welding machine from the mains before opening the power source.
These safety instructions are crucial to ensure your safety and the safety of others while using the GYS 400T DUO MIG-MAG - TIG - MMA Welding Machine. Always refer to the instruction manual for detailed safety guidelines and procedures.
Add New Comment