User Manual Q&AAnswer
Oct 14, 2025 - 09:34 AM
Blurry images when viewing through the microscope can be due to improper focusing or incorrect settings. Here are some steps to address this issue based on the user manual:
1. **Adjust Focal Distance:** Ensure that the microscope is within the best focal length range of 2-60mm. You may need to adjust the focal distance by turning the focusing wheel slowly left and right until the object is clear.
2. **Check Focusing:** Make sure you have adjusted the microscope to the best viewing distance. Incorrect focusing can result in blurry images. Adjust the focal distance until you achieve maximum clarity.
3. **Avoid Interference:** Ensure there is no interference from external sources that could affect the image quality. Dust or obstructions on the lens can also cause blurriness. Try tapping the device gently to remove any dust particles.
4. **Proper Lighting:** Adequate lighting is essential for clear imaging. Adjust the light size of the equipment using the light adjustment button to enhance visibility.
By following these steps and ensuring proper setup and focusing, you should be able to achieve clear and sharp images when using the digital WiFi electronic microscope.
Add New Comment