User Manual Q&AAnswer
Oct 13, 2025 - 09:07 AM
To start measuring particles using the ADK Instruments PCE-MPC 10 Particle Counter, follow these steps:
1. **Power On:** Press and hold the Power ON/OFF button until the LCD display turns on.
2. **Measurement Mode:** Once the device is powered on, press the Measure and Enter button to start measuring PM2.5 and PM10 particles. The LCD display will show "Counting" in the top left corner, countdown in the top right corner, and the PM2.5 and PM10 data along with temperature and humidity readings at the bottom of the display.
3. **Stop Measurement:** Press the Measure and Enter button again to stop the measurement. The LCD will display "Stopped," showing the last measurement data. The data is automatically saved to the instrument memory, which can store up to 5000 sets of data.
By following these steps, users can easily initiate and stop the particle measurement process with the PCE-MPC 10 Particle Counter.
Add New Comment