User Manual Q&AAnswer
Oct 12, 2025 - 05:06 PM
To set the timer on the WeTeKom 928643 Convector Heater with Timer, follow these steps as outlined in the manual:
1. **Familiarize yourself with the control elements of the timer.**
2. **Set the time switch to the current time:**
- Turn the outer dial ring clockwise until the clock time on the 24-hour plan matches the arrow pointer. The outer dial ring allows for time settings in 15-minute intervals.
- Example: At 8 p.m., turn the outer dial ring until it aligns with the number 20.
3. **Move the red 3-Position-slide switch to the clock symbol. The timer is now activated.**
4. **Switch on the convector heater by using the turn xxxx (4).**
5. **Set the switch-on and switch-off times by moving the segments outwards:**
- Each segment corresponds to a time setting of 15 minutes.
- When all segments are pushed out, the heater will be switched on for 24 hours.
6. **Ensure the unit is plugged in, switched on, and the thermostat is set to the desired setting.**
- In this case, the unit will switch on and off every day at the adjusted times.
7. **If the 3-Position-slide switch is pushed to the override position I:**
- The convector heater will be in continuous heating operation mode, allowing for manual operation using the turn xxxx (4) and the thermostat (5).
- The timer will keep running without affecting the manually adjusted settings.
8. **If the 3-Position-slide switch is in position 0, all heating functions are switched off.**
By following these steps, you can effectively set and utilize the timer function on your WeTeKom 928643 Convector Heater with Timer.
Add New Comment